Infiniton CV-17H76 Manual De Instrucciones página 31

5. Place it on a smooth surface with
its panel upwards. Loose screw
and pard 1 , then install them to the
left side and tighten securely.
6. Lay the refrigerator on soft foam
packaging or similar material.
Remove both adjustable bottom feet
parts, and the lower hinge part by
unscrewing the special flange self-
tapping screws.
Lower hinge part (right)
1
2 Adjustable bottom feet part
Self-tapping screws
3
7. Replace the lower hinge part to the
left side and fixing it with the special
flange self-tapping screws. Replace
the adjustable bottom feet parts to
2 another side and fixing it .
8. Transfer the door to the property
position, adjust the lower hinge part,
make the hinge axis into the lower
hole of the door.
9.Transfer the upper hinge part and
make the upper hinge axis into the
upper hole of the door, and adjust the
position of the door (please support
the door with your hand when doing
it), fixing the upper hinge part with
the special flange self-tapping
screws.
10