Top Innovations SteamFast SF-434 Manual De Instrucciones página 7

2- -1 F
IN
TELESCOPIC POLE
The Telescopic Pole is made up of four sections (FIGURE 1):
• TOP (SECTION 1)
• MIDDLE-TOP (SECTION 2)
• MIDDLE-BOTTOM (SECTION 3)
• BOTTOM (SECTION 4)
SECTIONS 1, 2 & 3 are adjustable in length. By using the Extension Locks, these sections may be
expanded or collapsed in order to achieve the desired length. Refer to Adjusting Telescopic Pole
section below for more details.
NOTE: SECTION 4 (BOTTOM) is the widest section of the Telescopic Pole. This section
includes the COUPLING, which secures the Telescopic Pole to the Pole Base.
CONNECTING TELESCOPIC POLE
1. Insert SECTION 4 of Telescopic Pole into Pole Base (FIGURE 2-A).
2. Tighten coupling on Telescopic Pole by turning it in a clockwise direction (FIGURE 2-B).
This will secure Telescopic Pole in place.
NOTE: To properly balance unit, align Telescopic Pole so that
clothes hanger hook on Pole Top faces towards front of steamer
(FIGURE 2-C). Nozzle Station will attach on opposite side of
Telescopic Pole (refer to Page 9 for details).
A
A
SSEMBLING THE
S
ABRIC TEAMER
FIGURE 1
B
FIGURE 2
Top Innovations, Inc.
& I
RON
FRONT
C
7