Klarstein Hot Spot Pebble Manual Del Usuario página 24

EN
24
Setting the Timer
Press the TIMER button
increases one hour for timer. After setting time, the display will show current setting time
for 5 seconds, then resume to previous display, meanwhile the light of the timer icon
will be on. Below picture is an example of setting 8 hours:
Appointment "ON"
In standby mode, press TIMER button
00-12 hours. After complete setting, the display shows the appointment turn-on time
and also the light of the timer icon
for each hour passed. When the appointment power-on time arrived, the product will
automatically turns on. The default setting temperature is 23 °C during appointment turn-
on. Below picture is an example to set appointment turn-on time to 8 hours:
Note: If not setting the temperature and weekly program, the appliance will
automatically turn-off after 12 hours of continuous work, and enter into standby.
to set timer (0-12 hours). Pressing the button one time
you can set the appointment turn-on time in
is on. The display automatically decreases 1 hour