Cequent Performance Products 75908 Instrucciones De Instalación página 4

1. Lower and remove spare tire from vehicle. The tire release is located
underneath the storage compartment in the back of the vehicle.
3. Lower exhaust by removing the rear and side hangers, support the
exhaust to prevent damage. Spraying a lubricant or soapy water on the
metal hanger rod and the rubber isolator helps removal. Remove rubber
plugs from bottom of frame rail. Both sides
©2015 Cequent™ Performance Products, Inc. -
Printed in Mexico
2. Remove the driver side rear plastic cover, located underneath the vehicle, by
using a small Phillips head screwdriver to remove fasteners, also remove (5)
plastic push pins and (2) nuts.
4. Run the M10 bolts into existing weldnuts in frame rail to remove any
debris. Remove bolts.
Sheet 4 of 18 75908NP 3-2-15 Rev. A