A Safety And Regulatory Information; Safety Information; Regulatory Information - HP PB Guia De Instalacion

international.book : appenda 17 Mon Dec 19 17:12:35 1994
Safety and regulatory information

Safety information

Warning
All inputs/outputs are Safety Extra Low Voltage
(SELV) circuits.
Warning
Electrical Shock Hazard
Do not remove system covers. To avoid electrical shock,
use only supplied power cords and connect only to
properly grounded (3-hole) wall outlets.
Safety earth ground
The computer on which this product is installed is a
safety class I product and is provided with a protective
grounding terminal. An uninterruptable safety ground
must be provided from the main source to the product
input wiring terminals, power cord, or supplied power
cord set. Whenever it is likely that the protection has been
impaired, the product must be made inoperative and must
be secured against any unintended operation.
Caution
The hardware contains electronic components that
can be damaged by static electricity. To avoid
damage, follow these guidelines:
- Store the hardware in its conductive plastic bag.
- If possible, work in a static-free area.
- Only handle circuit boards by the edges.
Do not touch electronic components or electrical
traces. We strongly recommend that you use a
grounding wrist strap that is connected to the
metallic chassis of the host computer. If you do not
have a wrist strap, touch the chassis before handling
adapters and frequently thereafter to equalize any
static charge

Regulatory information

For the United States
Federal Communications Commission (FCC) Radio
Frequency Interference Statement
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
A
17