Visulas Yag Iii Power-Up Mode; Yag Iii Treatment Mode; System Test; Combination Mode Activated - Zeizz VISULAS YAG III Instrucciones Para El Uso

VISULAS YAG III power-up mode

When the YAG system is switched on using the key switch (1,
Fig. 8), the system automatically performs a self-test (Fig. 29). When
the self-test has been completed, the system switches into
combination mode and message Fig. 30 is displayed on the YAG
console. The YAG laser can now be operated using the
VISULAS 532s control panel only.
The combination message continues to be displayed on the YAG
console as long as the system remains in combination mode and
there are no system errors (Fig. 30).
Should an error occur on the VISULAS YAG III whilst in combination
mode, the VISULAS 532s logs off automatically. The relevant error
message is displayed on the YAG console display. The YAG laser
cannot be operated or logged back on until the error has been
resolved and the system restarted.
If an error occurs during the system self-test, an error message is
displayed. If this error cannot be resolved using the table on
page 58, please inform our service department.

YAG III Treatment mode

•
In the main menu, select the
Fig. 31

Main menu after selecting the YAG laser as applicator

000000-1354-664 VISULAS YAG III 15.08.2005
Operation
YAG laser as applicator.
Fig. 29

System test

Fig. 30 Combination mode
activated
51