Visulas 532S Control Panel For Visulas Yag Iii Combi - Zeizz VISULAS YAG III Instrucciones Para El Uso

24
Description

VISULAS 532s control panel for VISULAS YAG III Combi

The VISULAS YAG III Combi is menu operated using the buttons on the
VISULAS 532s control panel (1) and the combined knob/button (6).
To operate the laser console, which is mounted under the table on the
right, the control panel is removed and placed on the table (see also
the VISULAS 532s user manual).
• Insert the connector (2) into the port (3).
• To remove, hold the control panel at the front with both hands. Tilt
the upper edge forwards so that the guide rod (7) is released from
the retaining element (4).
• Remove the control panel by pulling it towards you carefully.
The control panel's lower guide rod (8) can be rotated by up to 90°,
allowing the control panel to be safely angled towards the user.
• You can vary the system parameters in the individual operating
modes by turning the combined control knob/button (6).
Pressing the button selects the laser power output parameter in all
modes.
000000-1354-664 VISULAS YAG III 15.08.2005