Programming The Radio Through - Motorola CLP Serie Guia Del Usuario

PROGRAMMING THE
RADIO THROUGH THE CPS
Your dealer or system administrator may have
customized your radio for your specific needs.
Check with your dealer or system administrator
for more information.
Programming the Radio
To programme the radio:
1. Connect the radio via the Drop-in Charger Tray
or the Charging Pocket with "PROG" label on
the Multi-Unit Charger and CPS Programming
Cable.
Programming the Radio through a Single Unit
Charger
Programming the Radio through a Multi-Unit
Charger
2. Make sure the radio is turned ON.
3. Once the radio is connected, open the CPS and
select "Read" on the toolbar to get the radio
profile. The CPS allows the user to change
settings, such as General, Audio, Menu,
Channels, Scan List, Customised PL/DPL,
Bluetooth (*) as well as select frequencies,
PL/DPL codes on each channel.
4. After you change the settings, press "Write"
on the toolbar to save the settings.
For more information on the Computer Programming
Software, please refer to Help menu on the CPS.
19
English