Assembly Steps; Installation Steps - LUND 601011 Instrucciones De Instalación

Assembly Steps

Assemble the cargo carrier as shown. Use a rubber mallet, if needed, to
mate the halves. Lock the carrier together use the tapping screws as
shown.
Halves Cargo

Installation Steps

Attaching Cargo Carrier to Vehicle Roof Rack:
Note: Follow your vehicle's owner's manual for instructions for altering the roof rack's support bars spacing (if
equipped).
If your vehicle's roof rack is adjustable maximize the support bar spacing for the Cargo Carrier. See Clamp
Installation illustration.
1
45044
Rev. B
Self Tapping Screw
(2) Required
Page 2 of 4
2
Insure that all the hardware is tightened securely and the cargo carrier does not move along the roof rack.
3
45044
Rev. B
M6-1 Nuts
Star Knobs
Top Clamp
Clamp Installation
(4X)
Page 3 of 4
U-Bolt