Using The Ac Adapter - HoMedics TheraP BPA-150 Manual Del Usuario

USING THE AC ADAPTER

Note: • Please unload the batteries from the battery
pack when operating with the AC adapter for
an extended period of time. Leaving the batter-
ies in the battery pack for a long time may
cause leakage, which may lead to damage
of the unit.
• No batteries are needed when operating with
the AC adapter.
1. Remove the battery pack by pressing down on the
latch and pulling away from the monitor.
2. Connect the AC adapter with the AC adapter jack
in the back of the unit as shown below.
3. Please use only the AC adapter included with
this monitor.
Connect AC
adapter here
AC Adapter
Input: 120V 60Hz
Output: 12V DC 500mA
13