HoMedics TheraP BPA-150 Manual Del Usuario página 21

3. After all symbols disappear, the display will
show a blinking "0". The monitor is "Ready to
Measure" and will automatically inflate the
cuff to start measurement.
4. Once your systolic pressure is determined, the monitor
will begin deflating to measure your diastolic pressure.
Note: This monitor will re-inflate automatically if the
system detects that your body requires more
pressure for measurement.
5. When the measurement is completed, the cuff will
deflate. Systolic pressure, diastolic pressure and
pulse will be shown simultaneously on the LCD
screen. The measurement is then automatically
stored into memory.
20