Power Save Mode - Oki C6000n Guía De Referencia Rápida

English

Power Save Mode

Power Save sets how long the printer
waits before going into standby
mode. This saves energy, but the
printer requires time to warm up
when it receives a print job or if you
want to enter the menu and change
settings.
Setting the Power Save Interval
1. Press + repeatedly until you see
SYSTEM CONFIG MENU on the
display.
2. Press ENTER.
POW SAVE TIME
60 MIN
3. Press ENTER.
The second line of the display
starts blinking.
4. Press + repeatedly until the value
you wish to select (5, 15, 30, 60
[default], or 240 minutes) appears
on the display.
5. Press ENTER twice.
The new setting is engaged and
the second line of the display
stops blinking.
6. Press ON LINE.
Disabling (or Re-enabling) Power
Save
The printer comes set for Power Save
enabled. To disable (or enable) Power
Save
1. Press ENTER to enter the Menu
mode.
2. Press - repeatedly until you see
MAINTENANCE MENU on the
display.
3. Press ENTER.
4. Press + repeatedly until you see
POWER SAVE
*
ENABLE†
5. Press ENTER.
The second line of the display
starts blinking.
6. Press + to toggle back and forth
between DISABLE and ENBABLE.
7. Press ENTER twice.
The new setting is engaged and
the second line of the display
stops blinking.
8. Press ON LINE.
20