IKEA ELDSLÅGA Manual De Instrucciones página 10

ENGLISH
ADAPTING TO DIFFERENT TYPES
OF GAS
In order to adapt the
appliance to a type of gas other
than the type for which it was
manufactured (indicated on the
rating label), follow the dedicated
steps provided after installation
drawings.
ELECTRICAL WARNINGS
IMPORTANT: The data
relevant to the voltage an power
absorptions are indicated on the
rating plate.
The power cable must be long
enough to connect the appliance,
once fitted in its housing, to the
main power supply. Do not pull the
power supply cable.
It must be possible to
disconnect the appliance from the
power supply by unplugging it if
plug is accessible, or by a multi-
pole switch installed upstream of
the socket in accordance with the
wiring rules and the appliance
must be earthed in conformity
with national electrical safety
standards.
Do not use extension leads,
multiple sockets or adapters.
The electrical components must
not be accessible to the user
after installation. Do not use the
appliance when you are wet or
barefoot. Do not operate this
appliance if it has a damaged
power cable or plug, if it is not
working properly, or if it has been
damaged or dropped.
If the supply cord is damaged,
it must be replaced with an
identical one by the manufacturer,
its service agent or similarly
qualified persons in order to avoid
a hazard - risk of electrical shock.
10