Publicidad
Step 14
Insert a SLIDE CAM (DD) into the LARGE DRAWER SIDES (D132 and D138).
å
Fasten a DRAWER RIGHT (40DC) to the LARGE RIGHT DRAWER SIDE (D132) and a DRAWER LEFT (40DD) to the LARGE
å
LEFT DRAWER SIDE (D138). Use four GOLD 5/16" FLAT HEAD SCREWS (TT) through holes #1 and #2.
NOTE: The parts are marked "DRAWER RIGHT" and "DRAWER LEFT" for easy identifi cation.
å
NOTE: The glides are not intended to rotate.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Repeat this step for the other drawers.
å
Glide end
2
Page 18
DD
1
D138
(4 screws per drawer)
TT
GOLD 5/16" FLAT HEAD SCREW
(16 used in this step)
411197
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
DD
D132
2
www.sauder.com/services
Glide end
1
Publicidad
