Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (X) into the large holes in the ENDS (A2
and B2). Repeat this step for the BOTTOMS (D).
X
www.sauder.com/services
Do not tighten the TWIST-LOCK® FASTENERS in this step.
(8 used)
B2
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
A2
411197
Page 5
Publicidad
