Rec Ctwb Mode - Nice RMF3004 Manual Del Usuario

REMOTE MODE (No*, Yes)
Enables the Receiver control via software integrated in the MG 3000 Module
(remote validation).
B) INPUTS MENU
See item "Common Menus"
C) OUTPUTS MENU
See item "Common Menus"
D) DISPLAY MENU
See item "Common Menus"
07 -

REC CTWB MODE

DIP 1
ON
A) CT/SN MENU
CT PANIC [1, 2, 3, 4] (L, N*)
Enables the "immediate panic" function on the desired channels for RFID scan-
ners. For biometric scanners connected by Wiegand, the user's 2nd Digital will
act as "immediate panic" (in this condition, RFID cards/keyfobs do not generate
"panic").
2XCARD PANIC (No*, Yes)
Enables the panic function by swiping the same registered device 2 times in the
RFID scanner, within 2 seconds. For biometric scanners connected by Wiegand,
the same behavior occurs for RFID cards/keyfobs.
PASSWORD 10 DIGITS(No*, Yes)
When "No" is selected, the password access format (RFID keypad) will be "Unit"
(up to 4 digits) + ENTER key (or #) + "Password" (up to 6 digits) + ENTER key
(or #).
When "Yes" is selected, the password access format will be "Password" (up to
10 digits) + ENTER key (or #).
When pressing the ENTER key (or #) again after the previous sequences, the
"panic" event will be generated to the Module.
T. PASSBACK (off*, 1 to 99 s)
Time in seconds in which the equipment disregards the identification of a similar
10
DIP 2 DIP 3
OFF OFF
DIP 4
X
- ENGLISH -
66