Display Menu; Rec Tx+Tp Mode - Nice RMF3004 Manual Del Usuario

SCAN (simultaneous*, sequential)
Configures the method of reading UHF Tags when two or more UHF antennas
are connected to the Receiver.
T. PASSBACK (off*, 1 to 99 s)
Time in seconds in which the equipment disregards the identification of the same
registered UHF Tag.
T. ANTI HIKE (off*, 1 to 99 s)
Time in seconds where the Receiver is inactive after the identification of a UHF
Tag, preventing the passage of two vehicles duly equipped with the registered
devices, in the same opening. Thus, it should be notified to users that the system
allows a single pass at a time, especially fit when quick doors or barriers are
used, and all events are recorded by the system.
PASSBACK RELAY (simple*, continuous)
In the "simple" option, the relay will be docked according to the time defined in
the Receiver OUTPUTS menu, while the "continuous" option will cause the relay
to be docked for the time defined in T. PASSBACK, if the UHF Tag remains for
the entire period in the antenna field.
QUESTIONS TIME (0* to 5 s, step 0.5 s)
Determines the interval, in seconds, between questions (Receiver - UHF Anten-
na) by UHF Tag in the antenna field.
REMOTE MODE (No*, Yes)
Enables the Receiver control via software integrated in the MG 3000 Module
(remote validation).
b) INPUTS menu
See item "Common Menus"
C) OUTPUTS MENU
See item "Common Menus"
D) DISPLAY MENU
See item "Common Menus"

09 - REC TX+TP MODE

DIP 1 DIP 2 DIP 3 DIP 4
ON ON OFF X
- ENGLISH -
12
68