Technical Specifications; Key To Symbols; Simplified Eu Declaration Of Conformity - Urmet miro 1750/15 Manual Del Usuario

5. Define the button function
Follow the instructions in the following paragraph to determine the effect that the centralised button
should have:
BUTTON FUNCTION
FUNCTIONS
Function 1*
Function 2
Function 3
Function 4
* Default configuration
To changing the function of a button:
1 - Briefly press any button on the video door phone (Yokis Configuration Menu) 10 times. The video door
phone LED will blink rapidly.
2 - While the LED is blinking, press the chosen button from 1 to 4 and select the desired function: from 1 to
4, see above.
3 - The LED will blink from 1 (or 4) times to confirm calibration.
Restoring a video door phone Yokis Button to default settings
Default setting = delete button connections, return to function 1 (bistable), return to direct mode.
1 - Briefly press either Yokis button (Yokis Configuration Menu) 10 times. The video door phone LED will
blink rapidly.
2 - While the LED is blinking, rapidly press the button that you want to return to default setting 15 times.
3 - After pressing 15 times, the LED will blink 5 times to confirm.
Complete restore of the two video door phone Yokis buttons to default settings
1 - Briefly press either Yokis button (Yokis Configuration Menu) 10 times. The video door phone LED will
blink rapidly.
2 - While the LED is flashing, press either of the two Yokis buttons 25 times.
3 - After pressing 25 times, the LED will flash to confirm that default settings have been restored.
For more information and detailed configurations, consult the documentation on the two-button remote
controls on the www.yokis.com website.
8.

TECHNICAL SPECIFICATIONS

Power voltage: ............................................................................................................................... 36 ÷ 48 V
Consumption @ 48Vdc:
Standby: .................................................................................................................................. 1,5 ± 0,5 mA
Full rate: ................................................................................................................................... < 160 mAcc
Dimensions (WxHxD) ........................................................................................................ 160 x 130 x 26 mm
Wires with cross-section area of 0.5 mm
crosssection area smaller than 0.5 mm
9.

KEY TO SYMBOLS

Symbol

10. SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, URMET S.p.A. declares that the radio equipment type:
VIDEO HOUSEPHONE MIRO HANDS-FREE YOKIS Ref. 1750/15 or 1750/16
is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.urmet.com
DS1750-014B
MTR2000ERP
Power on / off
-
On
Off
2
must comply with IEC 60332-2-2.
2
Direct input voltage
See the installation manual of the device
MTV500ERP
Change / off
Memory on
On
Off
or larger must comply with IEC 60332-1-2; wires with
Description
MVR500ERP
Up / stop / down
Intermediate position
Up / Stop
Down / Stop
17