Location: It is recommended to place and level your washing
machine over firm ground such as concrete to minimize
vibrations during the spin cycle. However, you can adjust the
height of your washing machine with the leveling legs.
Plumbing: The washing machine water feed of your washing machine must be done
through: faucets with standard thread. The washing machine has wash options that
cold water. Better results are obtained if the water tap
supplies both temperatures. Your washing machine is designed to
work with domestic supply pressures that go from 70 to 500 kPa.
However, in some places of the country, this interval may be even
lower, which affects the filling time of your washing machine.
Draining: For draining, you need a vertical tube with a 3,8 cm internal diameter and a height
greater than 90,0 cm, but lower than 110,0 cm, connected to the house drainage system.
Space: If you want to install your washing machine in a closet or cabinet, you must
consider the free space additional to the dimensions of your washing machine and
ventilation, leaving an aperture in the doors. Avoid obstructing the lower part with rugs
or carpet.
44
0 cm
0 cm
12 cm
Requirements
90 cm minimum
96 cm
Ventilation
22 cm