Operating The Robot; Charging - Amibot Animal Motion Manual De Instrucciones

Operating the robot

Charging

Assembling the home base
Plug in the home base using the power cable.
Place the home base on a level surface next to a wall, at a right angle
to the floor. Keep a distance of at least 2 m in front of the base and
1 m at either side.
NOTE: When your AMIBOT Animal Motion robot is on its home base, make sure that
your robot is switched on and the home base power light is on.
Switching the robot on
Turn the power switch to ON. "I" is ON and "O" is OFF. The robot is
ready to be charged.
1 m
11
EN
1 m
2 m