Publicidad
Enlaces rápidos
Publicidad
Manuales relacionados para Roca SENTRONIC
Resumen de contenidos para Roca SENTRONIC
- Página 1 SENTRONIC WC Sensor flusher A890092200...
- Página 2 The sensitive distance between surrounding space and the right front side of product should not be less than 1500mm(1.5m). Sensitive distance of sensor does vary according to surrounding background color. 7-30mm Se recomienda una distancia libre alrededor del producto superior a G1”...
- Página 3 Connect water supply inlet and outlet and tie it firmly. Attention: Open the main water supply and validate that no leakage it’s observed. Conecte la entrada y salida de agua y fíjela firmemente. Atención: Abra la llave de agua principal y asegúrese que no hay fugas de agua.
- Página 4 Connect panel sensor cable, solenoid valve and power switch. Attention The installation direction of panel should be used the character, ROCA as teh front side. Confirm the correct direction of the connector , otherwise, this will cause the damage of product or invalid water proof.
- Página 5 Fix panel into the bracket (1), fastening it down along the wall tightly (2). Use a hex wrench to screw clockwise (3) till it is completely fixed. Attention: Protect the product while installing the panel for preventing to leave scratches on the surface of product. While using a wrench for fixing, please do not use it forcibly for preventing to damage the mechanism.
- Página 6 <60 >10 > >60 < <10 In case that detection time is less tan 10sec, flushing will not be performed. If detection time is longer than that, flush volume will be adjusted base on the detection time. <60 > En caso de que el tiempo de detección sea inferior a 10s, la descarga automática no se activará. Si el tiempo de detección es superior, el volumen de descarga >...
- Página 7 NOTE: This symbol and recycling system is only applicable in the European Union. It does NOT apply to the rest of the world. At ROCA we are committed to protecting the environment. Please help us by discarding this product at the end of it life-cycle in a responsible manner, to prevent that certain substances contained in electrical or electronic equipment may cause harm to human health and the environment.