Avaya 7316E Manual De Instalación

Avaya 7316E Digital Key Expansion
Module Installation Card
The Avaya 7316E Digital Key Expansion Module, is an add-on device which provides 24 extra
memory or line buttons for the Avaya 7316E Digital Deskphone. Up to nine KEMs can be con-
nected to an Avaya 7316E Digital Deskphone.
A Station Auxiliary Power Supply (SAPS) is required for Avaya 7316E Digital Deskphones that
have five to nine KEMs attached. For SAPS installation instructions, refer to the Avaya SAPS
Installation Card provided with the SAPS kit.
Single Avaya 7316E KEM installation
1 Position the metal hooks from
the left side of the KEM next to
the slots on the right side of the
7316E Digital Deskphone.
Firmly press the 7316E Desk-
phone and KEM together.
2 Slide the KEM down until its
aligned with the 7316E Digital
Deskphone.
3
Remove the stand
from the 7316E Digital
Deskphone.
4
Connect the KEM cord
to the accessory con-
nector port on the
7316E Digital Desk-
phone.
5 Replace the stand on the 7316E Digital Deskphone to
complete the installation.
Multiple Avaya 7316E KEM installation
1 Position the 7316E
Digital Deskphone and
KEMs together. Align
the hooks on each
KEM to the slots on the
next KIM. Firmly press
the 7316E Digital
Deskphone and KEMs together.
2 Slide the KEMs down
until they are aligned
with the 7316E Digital
Deskphone.
3 Remove the stands
Press here
from
to remove stand.
KEMs and
the 7316E Digital
Deskphone.
4 Connect each KEM
cord to the connector
port on the next KEM
in a daisy-chain
order.
5 Connect the cord on
the first KEM
to the accessory
connector port on the
7316E Digital Desk-
phone.
6 Replace the stands on the KEMs and the 7316E
Digital Deskphone to complete the installation.
Press here
to remove
stands.
KEM 3 KEM 2 KEM 1
Cord to
Avaya 7316E
KEM 1