Publicidad
Idiomas disponibles
Idiomas disponibles
Avaya 7316E Digital KEM KEM button number assignment
KEM indicators turn on and flash during the first ten seconds
after powering up. It can take up to five minutes for the KEM
to initialize.
The default setting for the programmable memory buttons
on the KEM is blank. The side illustration shows the button
number assignment on a KEM.
Troubleshooting Tip: An Addon Error message appears on
the Avaya 7316E Digital Deskphone display and an error
tone is generated when there is a connector problem with a
KEM. Check that the KEM cord is properly inserted into the
accessory connector port of the Avaya 7316E Digital Desk-
phone.
Avaya 7316E Digital KEM coldstarts
Internal autodial numbers can be automatically assigned to the programmable memory buttons on the
KEM when a coldstart is performed. Internal autodial numbers are assigned in ascending order start-
ing on the top left button (button 01) on the KEM. A coldstart must be performed during the first ten
seconds after powering up a KEM.
To coldstart an individual KEM
1
Unplug the Avaya 7316E Digital Deskphone line
cord, then reconnect it to power up.
2
While the indicators are
flashing on the individual
KEM, simultaneously press
the top two and the bottom
two buttons on the lower
button set of the KEM, as
shown in the illustration
(buttons: 05, 12, 17 and 24).
3
At the beginning of the coldstart, indicators beside
each KEM button will briefly flash starting at the
bottom right button (button 24).
4
When the KIM coldstart is completed, the Avaya
7316E Digital Deskphone telephone display auto-
matically returns to the time and date.
2
To coldstart all KEMs
1
Unplug the Avaya 7316E Digital Deskphone line
cord, then reconnect it to power up.
2
While the indicators are
flashing on the first KEM
(next to the telephone),
simultaneously press the
top two buttons and the
bottom two buttons on the
KEM, as shown in the
illustration (buttons: 01, 12, 13
and 24).
3
At the beginning of the coldstart, indicators beside
each KEM button will briefly flash starting at the
bottom right button (button 24).
4
When the KIM coldstart is completed, the Avaya
7316E Digital Deskphone telephone display auto-
matically returns to the time and date.
B01
B13
B02
B14
B03
B15
B04
B16
B05
B17
B06
B18
B07
B19
B08
B20
B09
B21
B22
B10
B11
B23
B12
B24
www.avaya.com
Copyright 2010 Avaya
NN40060-301 04.02
Printed in Canada
Publicidad
