Adjusting Tilt Brackets - PEERLESS ONEMount ONE-TP Instalación Y Ensamblaje

Adjustment of Extension Brackets
Loosen four 1/4-20 x 1/4" screws on each adapter bracket (BB,CC). Position extension brackets, with slots
1
facing downward, onto adapter brackets (BB,CC) at the appropriate position to accommodate your screen as
shown in Figure 1.1. Securely tighten all 1/4-20 x 1/4" screws as shown in figure 1.2.
NOTE: In all bracket extension positions, stops and 1/4-20 x 1/4" screws must be engaged in slots as shown in
figure 1.2.
TOP
EXTENSION
BRACKET
BOTTOM
EXTENSION
BRACKET
BB,CC
ADAPTER
BRACKET
1/4-20 x 1/4"
SCREWS
Make sure
slots face
downward.
fig 1.1
4 of 33
BB,CC
TIGHTEN
FASTENERS
ISSUED: 09-20-06 SHEET #: 202-9167-4 11-13-07
STOP
STOP
fig 1.2