Metra 99-5823CH Instrucciones De Instalación página 7

MAIN SCREEN TEXT CUSTOMIZATION
1. Press and hold the MAX A/C button for 10 seconds.The
current home screen will then be displayed and the cursor
will appear and blink. It will be located in the 1st location
on the top row.
2. To modify the text:
A. Use the FAN buttons to move the cursor for-
ward or back. The location where the cursor is
blinking is the location that the character may be
changed.
• FAN DOWN = Move Cursor ahead one location
• FAN UP = Move Cursor back one location
B. To change the character where the cursor is cur-
rently blinking use the TEMP buttons to progress
through the character set.
• TEMP UP = Show the next character
• TEMP DOWN = Show the previous character
99-5823CH
Customizing the Display
3. To exit this mode:
4. To erase any changes made to the default display – Press
NOTE : Characters are saved into memory immediately
whenever changes are made.
NOTE : While in this mode – no other display items will be
updated.
7
®
A. Do not press ANY buttons for 15 seconds and it
will timeout automatically.
B. Press any button other than the 4 mentioned above.
and hold down the recirculation button button for 15
seconds. The "TAURUS" will once again be the default
display.