Wirelessdevice Setup And Programming; [001]-[716] Wireless Device Configuration; [801] Rf Jam Detect - Johnson Controls Tyco HSM2HOST Manual Del Usuario

Wireless device setup and programming

[804][001]-[716] Wireless Device Configuration

To configure wireless devices, complete the following steps:
1.
Enter Installer Programming section [804] then select one of the following sub-sections:
001-248 – Configure Wireless Zones
l
601-632 – Configure Wireless Keys
l
701-716 – Configure Wireless Keypads
l
2.
Select a device to configure using the scroll keys or go directly to a specific device by entering
a hotkey.
3.
Use the scroll buttons or enter a hotkey to select a configuration option for the device. See
device sheets for details.
4.
Press [*] to accept and move to the next option.
5.
Once all options are configured, the system returns to the base configuration menu.
6.
Repeat the process described above to configure other wireless devices.

[804][801] RF Jam Detect

To configure RF jamming, complete the following steps:
1.
Enter Installer Programming section [804][801] then select one of the following options:
00–Disabled
l
01–UL20/20-USA
l
02–EN30/60-Europe
l
03–Class630/60-British
l
2.
Press [*] to accept the selection.
3.
Press [#] to exit the section.
- 10 -