Safetyinstructions; Important - Johnson Controls Tyco HSM2HOST Manual Del Usuario

Safety instructions
Read the safety information before you install the equipment.
IMPORTANT- This equipment must be installed by a skilled person only. A skilled person is an
installer with appropriate technical training. The installer must be aware of potential hazards during
installation and measures available to minimize risks to the installer and other people.
• Before you install this equipment, disconnect all power sources (for example mains, battery, and
telephone line) connected to the alarm panel.
• Install the equipment indoors in a non-hazardous environment where the following conditions are
met:
- Pollution degree - Maximum 2
- Over voltages - Category II
• Internal wiring must be routed to prevent strain on wire and terminal connections, loose terminal
connections, and damage to conductor insulation.
• Instruct the user that there are no user serviceable parts in this equipment. All equipment must be
serviced by a skilled person.
- 5 -