[000] Enrolling Wireless Devices; [000] Wireless Device Enrollment - Wireless Keys - Johnson Controls Tyco HSM2HOST Manual Del Usuario

[804][000] Enrolling wireless devices

1.
Enter Installer Programming section [804][000].
2.
When prompted, either activate the device (see device installation sheet) to enroll immediately
or enter a device ID number. Do the latter to pre-enroll devices then enroll them later at the
customer site. The alarm panel determines the type of device being enrolled and presents the
appropriate programming options.
3.
Use the scroll keys or type in the corresponding number to select an option.
4.
Scroll through the available selections, key in a number or enter text as appropriate.
5.
Press [*] to accept and move to the next option.
6.
Once all options are configured, the system prompts to enroll the next device.
7.
Repeat the process described above until all wireless devices are enrolled.
[804][000] Wireless device enrollment – Wireless keys
Key# Partition#
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
User Label
- 14 -
Key# Partition#
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
User Label