System Update - Milwaukee M18 SIC36 Manual Original

2.14 System update

Before updating a system, go to SETTINGS  ABOUT and make a note of the current fi rmware revisions in the
system.
Firmware updates can be performed with the WIRELESS MONITOR M18SIM M18 SIM or tablet running the
MILWAUKEE® PIPELINE INSPECTION APP.
1. Turn on both the CONTROL HUB M18 SISH and WIRELESS MONITOR M18SIM M18 SIM or tablet running the
MILWAUKEE® PIPELINE INSPECTION APP.
2. Check that the WIRELESS MONITOR M18SIM or tablet is connected to the CONTROL HUB M18 SISH by WI-FI. If
it is not connected, you will need to connect it.
3. Insert a Thumb Drive with the fi rmware update on it into the CONTROL HUB M18 SISH's USB-A port.
4. Go to SETTINGS
SCREEN SETTINGS
DATE & TIME
UNITS
Feet
LANGUAGE
English
MANAGE JOBS
2019/05/10 6 FILES
SYSTEM UPDATE
FACTORY RESET
ABOUT
SERVICE & SUPPORT
5. Select CONTROL HUB M18 SISH.
CONTROL HUB
WIRELESS MONITOR
6. The fi lename of the update should be seen in this window.
Choose the fi lename to begin the update.
MTCam_hub.bin
7. Read and acknowledge the warning message by selecting OK.
Selecting OK will run a firmware update in
the Control Hub. Please do not interrupt the
update process after it has started.
Cancel
ENGLISH
 system update
SETTINGS
SETTINGS
SETTINGS
OK
19