General Informations; Specifi C Safety Rules For Pipeline Inspection Systems; Additional Safety And Working Instructions - Milwaukee M18 SIC36 Manual Original

Ocultar thumbs Ver también para M18 SIC36:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 130

1 GENERAL INFORMATIONS

1.1 Specifi c safety rules for pipeline inspection systems
When working in pipes, make sure that these are not live or electrically charged. The pipes must not contain any
liquid. The camera and the device must not come into contact with liquid.
The camera and the cable must not come into contact with oil, gas or other materials capable of causing
corrosion.
To reduce the risk of explosion, electric shock and property damage, always check the work area before
beginning a job. Do not allow cable to contact electrical, chemical, or moving hazards.
To reduce the risk of damage to the tool, do not use excessive force or "kink" the cable. Do not use in areas
where vi-sual inspection camera and cable will contact corrosive or oily substances.
Do not use the cable to clear clogs or move obstructions. This is not a drain cleaner!
Use latex or rubber gloves, goggles, face shields, protective clothing, and respirator when chemicals, bacteria or
other toxic or infectious substances are suspected to be in a drain line. Drains may contain chemicals, bacteria
and other substances that may cause burns, be toxic or infectious or may result in other serious personal injury.
Practice good hygiene. Do not eat or smoke while handling or operating the tool. After handling or operating
equipment, use hot, soapy water to wash hands and other body parts exposed to drain contents. This will help
reduce the risk of health hazards due to exposure to toxic or infectious material.
Inspect cable for wear and damage before use. Do not twist, kink or over bend cables. Replace a worn or
damaged cable before use.
CAUTION Use care when transporting this tool when the reel and backpack are connected. Tipping may occur.
Always use common sense and be cautious when using tools. It is not possible to anticipate every situation that
could result in a dangerous outcome. Do not use this tool if you do not understand these operating instructions or
you feel the work is beyond your capability; contact Milwaukee Tool or a trained professional for additional
information or training.
Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a
MILWAUKEE service facility for a free replacement.
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals
are:
- lead from lead-based paint
- crystalline silica from bricks and cement and other masonry products, and
- arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well-ventilated area, and work with approved safety equipment, such as
those dust masks that are specially designed to fi lter out microscopic particles.

1.2 Additional Safety and Working Instructions

Do not try to replace the battery pack if the surface of the instrument is wet.
Do not dispose of used battery packs in the household refuse or by burning them. Milwaukee Distributors off er to
retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects (short circuit risk).
Use only System M 18 chargers for charging System M 18 battery packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact
with battery acid wash it off immediately with soap and water. In case of eye contact rinse thoroughly for at least
10 minutes and immediately seek medical attention.
Warning! To reduce the risk of fi re, personal injury, and product damage due to a short circuit, never immerse
your tool, battery pack or charger in fl uid or allow a fl uid to fl ow inside them. Corrosive or conductive fl uids, such
as seawater, certain industrial chemicals, and bleach or bleach containing products, etc., Can cause a short
circuit.
This appliance is not intended to be used or cleaned by persons with reduced physical, sensory or mental
capabilities, or lack of experience or knowledge, unless they have been given instructions concerning the safe
use of the appliance by a person legally responsible for their safety. They should be supervised whilst using the
appliance. Children shall not use, clean or play with this appliance, which when not in use should be secured out
of their reach.
ENGLISH
2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

M18 sic60M18 sish

Tabla de contenido