Fiber-Optic Cable Handling - StorageTek L80 Manual Del Usuario

Ocultar thumbs Ver también para L80:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Fiber-optic Cable Handling

Observe these precautions when you handle fiber-optic cables:
Do not coil the cable to less than 96 mm (3.75 in.) in diameter.
Do not bend the cable to less than 12 mm (0.5 in.) in radius. StorageTek
recommends that a cable's bend radius be no less than 20 times the diameter of the
cable.
Do not pull on the cables; carefully place them into position.
Do not grasp the cables with pliers, grippers, or side cutters; do not attach pulling
devices to the cables or connectors.
Keep cables away from sharp edges or sharp protrusions that could cut or wear
through the cable; make sure that cutouts in the equipment have protective edging.
Protect the cable from extreme temperature conditions.
Install the connector's protective cover whenever the connector is not connected.
xx
Clean the connector before making a connection. Make sure that there
are no obstructions and that keyways are aligned.
Sixth Edition
96051

Publicidad

Tabla de contenido
loading

Productos relacionados para StorageTek L80

Este manual también es adecuado para:

96051

Tabla de contenido