foldinG handle
(Available on select models only)
2.5
Press
Handle
Release (A) to fold the
handle to storage posi-
tion.
handle positions
2.7 The handle of your
cleaner
has
two
positions: 1) Upright for
storage and when using
cleaning
tools.
Operating position for
general operation on
carpets and floors.
Step on handle release
pedal to lower handle.
carpet heiGht adJustMent
2.8
for storage.
2.5
A
2.7
2)
A
transportinG cleaner
2.6
To
cleaner from room to
room, put handle in
upright
cleaner back on rear
wheels
forward.
1
2
2.8 To adjust height setting, PUSH DOWN and
TURN knob (A) to desired height setting.
For maximum cleaning performance, the following
carpet height settings are recommended:
• Lowest setting (1): for bare floors.
• Low setting (2): for all types of carpet.
• Higher settings: for very deep pile carpet,
where easier pushing effort is desired, while
maintaining good cleaning performance.
If the vacuum is difficult to push, push down and
turn knob to the next higher setting.
7
Actual model may vary from images shown.
2.6
move
your
position,
tilt
and
push
IMPORTANT