Carrying Cleaner; Handle Positions; Transporting; Embedded Dirtfinder™ Feature (Some Models) - Hoover WindTunnel 2 El Manual Del Propietario

C
To return cord for storage, hold
15
plug and press on button (C) at top
of cord reel. To prevent cord from whip-
ping, hold plug until cord is rewound.

Carrying cleaner

The cleaner can be carried by
18
placing hand under the carrying
handle and lifting.
08
Cord clip
To help keep the cord out of the
16
way while vacuuming, position
cord in cord clip (D), located on the
back of the Tag Along™ grip.

Handle positions

The handle of your cleaner has
19
three positions: upright for storage
and for when using cleaning tools; oper-
ating position for general operation on
carpets and floors; low for reaching
under low furniture. Step on handle
release pedal (E), then pull handle back
to lower handle.
Transporting cleaner
D
To move your cleaner from room
17
to room, put handle in upright
position, tilt cleaner back on rear wheels
and push forward.
Embedded DirtFINDER™
feature (some models)
With red and green lights, the
20
DirtFINDER™ system alerts the
user to areas of carpet that may need
more cleaning attention. It is able to
sense when embedded dirt is removed.
The clean light (green) will remain on
throughout cleaning except when the
detector senses that a larger amount of
dirt is being picked up; then the dirty
light (red) will come on.
When the dirty light is on, you should
take additional cleaning strokes in the
area until it changes to clean.