Set Display Brightness (Dimmer); Setting The Start Time For Auto Dimmer; Setting The Finish Time For Auto Dimmer - Medion LIFE E69644 Manual De Instrucciones

Set display brightness (dimmer)

 Press the MODE
 Press the
button to set the display brightness to high (the display shows DIM
ON).
 Press the
button to set the display brightness to low (the display shows DIM
OFF).
 Press the MODE
NOTE
The blue background lighting on the display is switched on in "DIM ON"
mode and switched off in "DIM OFF" mode.
Setting the automatic dim function
You can use the automatic dim function to control the period during which the
background lighting on the display should be deactivated.
 Press the MODE
 Press the
button to activate the automatic dim function (the display shows
"DT ON").
 Press the
button to deactivate the automatic dim function (the display shows
"DT OFF"). The background lighting on the display is then permanently lit up.

Setting the start time for auto dimmer

You can use this function to set the time at which the background lighting on the
display should be automatically switched off.
 Press the MODE
The preset start time is 23:00.
 Press the
button to put the time forward by one minute.
 Press the
button to put the time back by one minute.
 Hold down the
by 10 minutes.
 Press the MODE

Setting the finish time for auto dimmer

You can use this function to set the time at which the background lighting on the
display should be automatically switched back on.
 Press the MODE
The preset start time is 06:00.
 Press the
button to put the time forward by one minute.
 Press the
button to put the time back by one minute.
 Hold down the
by 10 minutes.
 Press the MODE
20
button five times until "DIM OFF" appears in the display.
button once to confirm the set display brightness.
button six times until "DT OFF" appears in the display.
button seven times until "DT START" appears in the display.
or button respectively to put the time forward or back
"
button again to save the setting.
"
button eight times until "DT STOP" appears in the display.
or " button respectively to put the time forward or back
button again to save the setting.
"