Setting Clock Time; Display Settings; Setting The Colour; Brightness - Medion 81919 Manual Del Usuario

Setting clock time

Set the time when the device is in standby mode.
DISPLAY/CLOCK
1. Press the
– FOLDER / PRESET +
2. Press the
DISPLAY/CLOCK
3. Press the
screen.
– FOLDER / PRESET +
4. Press the
DISPLAY/CLOCK
5. Press the
NOTE
The time display flashes when the power supply is restored after failure or
pause. Set the time again as described above.

Display settings

Setting the colour

The device has an illuminated multi-colour display. You can infinitely adjust the colours
between red, green and blue. The colour changes continuously in the standard setting.
DISPLAY COLOUR
1. Press the
maintain the current colour displayed.
DISPLAY COLOUR
2. Press the

Brightness

The brightness is set automatically using the ambient light. In a dark room the brightness
of the display is reduced; if the environment is bright, the screen becomes brighter to
provide better legibility.
10
button until the hour display flashes on the screen.
buttons to enter the hours.
button again until the minute display flashes on the
buttons to enter the minutes.
button again to save the settings.
button to stop the display changing colour and to
button again to restart changing colours.
Preparation