Technical Specifications; Power Requirements - Spectroline uVision Serie Manual De Instrucciones

ENVIRONMENTAL SPECIFICATIONS
The uVision™ series lamps are designed to be safe under the following conditions:
• For Indoor/Outdoor Use (dustproof and protected against low pressure jets of water);
• Temperature 50°F to 122°F (5°C to 50°C);
• Mains supply voltage fluctuations not to exceed ±10% of the nominal voltage.
LIMITED WARRANTY
The warranty policy for the uVision™ lamp is provided on the Certificate of Limited Warranty
enclosed separately with each unit. NOTE: For assistance of any kind, please contact the
Customer Service Department at Spectro-UV. Provide the model, the serial number of the
unit, and the date of purchase. The unit's serialization information is located (1) on the
packaging the unit is shipped in, (2) engraved on the unit's handle, and (3) labeled on the
reverse side of the unit's back plate.

TECHNICAL SPECIFICATIONS

uVision™ Series
UV-365ES; UV-365EH
Height
Width
Weight (with power supply)
Light Source
ELECTRICAL SPECIFICATIONS
Input: 100-240V AC, 0.8A, 50/60 Hz
Output: 12-15V DC, 2.1A
POWER CORD SPECIFICATIONS AND PARTS
LAMP PART NUMBER
UV-365ES; UV-365EH
UV-365ES/F; UV-365EH/F
UV-365ES/FA; UV-365EH/FA
UV-365ES/FB; UV-365EH/FB
*Each lamp is fitted with an 8-foot cord and the appropriate plug for the country of destination. An
optional 20-foot cord is available. The "/20" suffix denotes the 20-foot power cord options.
*See next page for detailed power cord information.
KEY FEATURES
• UV-365ES: Nominal steady state intensity of 4,700 µW/cm² at 15 inches (38cm).
• UV-365EH: Nominal steady state intensity of 7,000 µW/cm² at 15 inches (38cm).
• Large 6-inch (15.2 cm) diameter coverage area at 15 inches (38 cm) with a minimum
UV-A intensity of 1,200 µW/cm² for the UV-365ES, and a 7-inch (17.8 cm) diameter
coverage area at 15 inches (38 cm) with a minimum UV-A intensity of 1,200 µW/cm² for
the UV-365EH.
• Less than 1.0 foot-candle (11 lux) emission.
• Long-lasting UV-A lenses.
• Cool running, fanless design.
• White Light, LED Inspection Light.
• IP65 Rated: The uVision Series lamps are protected from total dust ingress and from
low pressure jets of water (from all directions). For more details, consult EN 60529
(British BS EN 60529:1992, European IEC 60509:1989).
UV-A (365nm) and white light
7.5"
3.5" x 4.25"
2.35 lbs. (1,065 g)
3 UV-A LEDs, 1 white light LED

POWER REQUIREMENTS*

100-120V/50–60Hz
230V/50Hz
220–240V/50Hz
230V/50Hz
4