Sauder 415107 Manual Del Usuario página 11

Step 6
Fill the hole in the LEFT END (B2) 1/4 to 1/2 full with GLUE (54M). Then, insert a WOOD DOWEL (15F) into this hole. Wipe
å
away the excess GLUE.
Next, fi ll the hole in BOTTOM (D) 1/4 to 1/2 full with GLUE (54M).
å
Fasten the LEFT END (B2) to the BOTTOM (D). Push the WOOD DOWEL (15F) in the LEFT END (B2) into the hole in
å
BOTTOM (D). Wipe away the excess GLUE. Tighten two TWIST-LOCK® FASTENERS.
Fill the hole in the BOTTOM (D) 1/4 to 1/2 full with GLUE (54M). Then, insert a WOOD DOWEL (15F) into this hole. Wipe
å
away the excess GLUE.
Next, fi ll the hole in the RIGHT END (A2) 1/4 to 1/2 full with GLUE (54M).
å
Fasten the RIGHT END (A2) to the TOP (C), BOTTOM (D), and SHELF (E). Push the WOOD DOWEL (15F) in the BOTTOM (D)
å
into the hole in the RIGHT END (A2). Wipe away the excess GLUE. Tighten six TWIST-LOCK® FASTENERS.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
54M
Edge with holes
15F
www.sauder.com/services
B2
E
S u r
f a c
e w
F A S
i t h
T E N
T W
E R S
I S T
- L O
C K
®
D
15F
Fill the holes 1/4 to 1/2 full with GLUE.
C
Finished edge
u t T
i t h o
e w
f a c
S u r
415107
E R S
A2
T E N
F A S
K ®
O C
T - L
W I S
Page 11