Sauder 415107 Manual Del Usuario página 15

Step 10
Fasten the SHELF MOLDING (M) to the SHELF (E).
å
Tighten three HIDDEN CAMS.
Fill the holes in the BOTTOM MOLDING (N) 1/4 to 1/2 full
å
with GLUE (54M). Then, insert a WOOD DOWEL (15F)
into these holes. Wipe away the excess GLUE.
Fill the two outer holes in the BOTTOM (D) 1/4 to 1/2 full
å
with GLUE (54M).
Insert the WOOD DOWELS (15F) in the BOTTOM
å
MOLDING (N) into the holes in the BOTTOM (D). Wipe
away the excess GLUE.
Fasten the BOTTOM MOLDING (N) to the BOTTOM (D).
å
Tighten three HIDDEN CAMS.
Push two FOOT CAPS (10E) onto the FEET (I and J). With
å
a hammer, tap two TACK GLIDES (12E) through the holes
of the FOOT CAPS (10E).
Surfaces without CAM SCREWS
15F
10E
J
12E
www.sauder.com/services
M
N
D
I
10E
54M
E
15F
415107
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued parts
is extremely diffi cult.
Page 15