Sauder 415107 Manual Del Usuario página 16

Step 11
Fasten four METAL BRACKETS (4G) to the TOP
å
MOLDING (K). Use four BLACK 9/16" LARGE
HEAD SCREWS (1S).
NOTE: Be sure the BRACKETS are even with the edge of
å
the TOP MOLDING (K).
Fasten two TIE PLATES (3G) to the TOP MOLDING (K).
å
Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
Push two LARGE RUBBER SLEEVES (59G) onto the
å
TIE PLATES (3G).
Fasten the TOP MOLDING (K) to the TOP (C).
å
Use four BLACK 9/16" LARGE HEAD SCREWS (1S)
through the METAL BRACKETS on the TOP
MOLDING and into the TOP.
BLACK 9/16" LARGE HEAD SCREW
(10 used in this step)
Page 16
1S
4G
59G
Finished surface
415107
3G
4G
K
The TIE PLATES
should be here.
K
C
www.sauder.com/services