Kohler K-702205 Guia De Instalacion página 8

Install the Wall Jambs (cont.)
Press and hold the legs of each anchor (provided) together and insert the anchor legs into the
pre-drilled mounting holes.
Repeat for all the anchors.
IMPORTANT! Risk of product damage. Bumper installation is critical. The bumpers keep the door panel
from contacting the frame, which can result in shattering glass.
Insert a #8-18 x 1-1/2" panhead screw through each of the four bumpers.
Align the holes in the wall jamb with the holes in the wall and secure the wall jamb to the wall
with #8-18 x 1-1/2" panhead screws. Bumpers should be located in the top and bottom holes. Do
not overtighten. The bumper may lose its shape.
Repeat the steps to locate the second wall jamb on the opposite wall, making sure the wall jambs
are located directly opposite of each other.
1054857-2-C 8 Kohler Co.