Kohler K-9655 Manual Del Usuario página 6

Install the Lavatory (cont.)
Install the drain to the lavatory according to the drain
manufacturer's instructions.
For glass Vessels lavatories:
Apply the adhesive seal included with the lavatory to the surface
of the bracket where the lavatory will rest, as shown. Follow all
cleaning and installation instructions for the adhesive seal.
For Dolce Vita lavatory:
Clean the bracket surface where the lavatory will rest. Complete
the lavatory installation according to the instructions included
with the lavatory. Follow all sealant application instructions
carefully.
For all other Vessels lavatories:
Clean the bracket surface where the lavatory will rest. Apply a
generous bead of silicone sealant (supplied) to the bracket
surface.
Position the lavatory on the bracket according to the installation
instructions included with the lavatory. Be sure the drain position
is correct.
Immediately remove any excess sealant. Smooth the sealant bead,
and fill in any gaps. Verify that the lavatory has not moved or
shifted. Allow the sealant to set for at least 30 minutes before
proceeding.
Complete the lavatory installation according to the lavatory
instructions.
1007276-2-B 6 Kohler Co.