Ratio SR1400NM Manual De Instrucciones página 34

C2
4. DUST EXTRACTION OUTLET (SEE FIG. D)
Fasten the vacuum adapter (15) onto the dust
extraction outlet until it latches. Additionally
fasten the vacuum adapter (15) to the fixed
guard with the two screws. Directly connect a
suitable vacuum hose to the adapter.
• The vacuum adapter must not be
mounted when no external dust
extraction is connected. Otherwise there
is danger of the extraction system becoming
clogged.
Clean the vacuum adapter regularly to
ensure optimum dust extraction. The vacuum
cleaner must be suitable for the material to
be worked.
5. HAND GRIP POSITION (SEE FIG. E)
Always hold your saw firmly with both hands
when operating.
E
34
6. SAFETY ON/OFF SWITCH (SEE FIG. F)
Your switch is locked off to prevent accidental
starting. Depress the lock off button then the on/
off switch and release the lock off button. Your
switch is now on. To switch off, just release the
on/off switch.
The blade may continue to rotate after switching
off. Wait until the machine comes to a complete
stop before setting down.
7. CUTTING GUIDE (SEE FIG. G, H)
There is a cutting guide notch (8) on the front
of the base plate (10) for use with a parallel
guide. For straight cuts, use the 0º guide mark
to align with your parallel guide scale. For a 45º
bevel cut, use the 45º guide mark to align with
D
your parallel guide scale. Securely clamp the
parallel guide Always make a trial cut to check
the setting.
G
H
F