Human Touch Robotic Massage iJoy Manual De Uso Y Cuidado página 7

customize massage
The massage-softening pad softens the massage intensity. For a stronger massage,
remove the massage-softening pad.
1. Flip the head pillow over the headrest, to the back of the chair.
2. Open the two backrest zippers most of the way down the backrest; do not detach the backrest pad from the backrest.
3. Pull the backrest pad outward, then open the zippered pocket inside.
4. To install the massage-softening pad:
a. Insert the pad into the zippered pocket and attach the top of it to the pocket using the hook and loop fasteners.
b. Smooth the pad downward until it is flat.
5. To remove the massage-softening pad, detach the hook and loop fasteners at the top of the pad, then carefully remove the pad.
6. Close the zippered pocket and the two backrest zippers.
7. Flip the head pillow back over the headrest and push down on the lower corners to secure it.
humantouch.com
intensity
To experience the full power
of Human Touch
the massage-softening pad
that comes preinstalled in your
human touch
But keep it handy, in case you
want to replace it in the future.
Hook and loop fasteners
Massage-softening pad
10
care and
just remove
™
To keep your product working and looking its best, please follow these simple care guidelines.
Cleaning:
1. Be sure to disconnect the power cord from the electrical outlet before cleaning.
massage chair.
™
2. Do not use benzene, thinner or any other solvents on your massage chair.
3. Remove dust on the backrest or armrest with a vacuum.
4. If the backrest or armrests become soiled, wipe with a damp cloth, then a dry cloth.
5. Common upholstery cleaners may be used for tough stains.
6. When cleaning the controller or around the power switch, use a dry cloth only. Never use a damp cloth to clean the controller or power switch.
Maintenance and Repair:
1. The mechanics of this product are specially designed and constructed to be maintenance free. No periodic lubrication or servicing is required.
2. Your chair should only be serviced by an authorized service center.
Storage:
1. When not in use for a long period of time, we recommend that the chair be covered, the power cord be coiled and that the unit be placed in an environment free of dust
and moisture.
2. Do not store near heat or open flame. Do not leave this product exposed to direct sunlight for long periods of time. This may cause fading or damage.
Miscellaneous:
1. Foreign objects should not be inserted between the massage nodes or the unit housing.
2. Care should be taken not to overload the unit.
WARNING:
This product is equipped with a thermal resetting protection device. This is an added safety feature to protect you and this product from
overheating. If the product should suddenly stop and will not start, turn the main power switch, located on the back of the product, to off and do not
operate the product for at least 30 minutes. Failure to turn the product off may result in the product starting unexpectedly when the product cools.
maintenance
11