Description - Dustcontrol DC 3800 H Turbo EX Manual Original

Ocultar thumbs Ver también para DC 3800 H Turbo EX:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
Technical data
*/ Sound level at a height of 1.6 m and a distance of 1 m according to DIN EN ISO 3744 in free space and
at maximum airflow.
Machine for the suction and removal of dry, health-hazardous, flammable, conductive dusts of
Dust Class H in Zone 22.
The sample unit, when used for the intended purpose, is thus suitable for the separation of dry, health-
hazardous, flammable, conductive dust with all exposure limit values (dusts with ELVs and dusts of carci-
nogenic substances).
Capacity (pressurisation and air flow)
kPa
30
25
20
15
10
5
0
50
100 150 200 300 m
DC 3800 H Turbo EX

Description

The DC 3800 H Turbo EX is an electrically operated,
robustly constructed dust extractor for use in con-
junction with dust-generating operations in industry.
Dust extractors of Type 22 are suitable for the col-
lection of flammable dust in Zone 22. Industrial dust
extractors are intended to be used for the suction
and removal of dust deposits. Explosion protection
is provided by the insulation of the electrical parts
and the potential equalisation of the components that
come into contact with dust. The machine can be
used at temperatures between +10 and +40 °C. The
DC 3800 H Turbo EX is suitable for general clean-
ing operations. Regular cleaning of the workplace is
important to prevent dust explosions.
The machine operates with negative pressure.
Separation of the coarse particles takes place in a
/h
3
cyclone, and separation of the fine dust takes place
in the filter unit.
The material is separated into a container that is at-
tached directly to the cyclone. The filter is cleaned
using reverse pulse.
The material that has been vacuumed up and filtered
is collected in a container with a capacity of 40 litres
with a plastic sack insert (part no. 42384H). The
container can be removed with a simple movement
of the hand, and the material is thus easily disposed
of. Carefully remove the full sack from
the edge of the bin and immediately seal it tight.
Then place a new plastic sack in the bin, and care-
fully pass the opening back over the edge of the bin,
ensuring that no damage is caused, and such that
no folds are visible.
DC 3800 H Turbo EX - 15
Part No 94264

Publicidad

Tabla de contenido
loading

Tabla de contenido