Description - Dustcontrol DC Tromb 400c Manual Original

Description

The DC Tromb 400 is stable, tough and reliable and
particularly suited to spot extraction where plenty
and easy dust is created. The DC Tromb 400 is used
for source extraction (with a maximum constriction
of Ø15 mm) in many situations, such as grinding,
welding, personal decontamination, and cleaning.
The DC Tromb 400 is driven by 2 single phase, two
stage fans.
The extraction system functions with negative pres-
sure (vacuum) that draws the air through suction
casings/nozzles, hose system, separator and fi lter
system. Coarse separation of dust occurs in the units
cyclone which is a highly effi cient separator for larger
particulate. The fi ne dust is separated and contained
by the fi lter system. There is a jacket mounted at the
top of the fi lter cartridge protecting it from the dust as
it enters the cyclone from the hose. Reverse pulse
fi lter cleaning gives long fi lter life and a consistently
high suction capacity. The machine is equipped with
a HEPA fi lter.
2017-10-09
a
L
DC Tromb 400a/c/L- 14
DC Tromb 400a
The machine is equipped with a container that can
be fi tted with a plastic bag. The extracted material
can then be easily recycled or disposed of.
DC Tromb 400c:
Material which has been extracted and separated is
collected in a plastic sack. The sack can be removed
with a simple hand grip. The collected material is
easily handled in this way for disposal or recycling.
DC Tromb 400L:
The machine is equipped with a fl exible bag system,
in which the dust is collected in a permanently closed
system.
c
Part No 9480-F