Description; Operation - Dustcontrol DC AirCube 1200 Manual Original

Description

The DC AirCube 1200, 2000 air cleaner is intended for
cleaning the air in a work area and is intended for use as
a compliment to spot extraction. Air is passed through a
combination filter and a microfilter. The HEPA filter ac-
tually separates particles to 99.995 %. The com-bination
filter separates the majority of the particles and thereby
prolonging the life of the microfilter.
When a loss of suction capacity is experienced the pre-
filter should be changed. If the suction capacity does not
increase after the pre-filter change then the HEPA filter
should also be changed.

Operation

Connect the machine to a suitable power source accor-
ding to the specification of the machine. When using an
extension cable with the machine, ensure that the con-
nection is water tight and the extension cable is suitably
rated.
2013-07-01
The fan has variable speed settings which allow for econo-
mical running, for example during the night.
The DC AirCube 1200 can also be used to discharge
air from work places which must be kept under negative
pressure. A 250 mm hose can be attached to the fan out-
let where necessary.
The DC AirCube 2000 can also be used to discharge
air from work places which must be kept under negative
pressure. A 315 mm hose can be attached to the fan outlet
where necessary.
Without accessories the machine is made for using in
an upright position to minimise dust whirling from the
outlet.
The DC AirCube 1200, 2000 aircleaner has two speed
settings which allows for economical running, for ex-
ample during the night.
DC AirCube 1200, 2000 - 10
Part No 42943