Programming - Cuisinart EM-25 Instrucciones Y Libro De Recetas

PREPROGRAMMED
CAPPUCCINO OR LATTE
1. Using the lever, open the brew head, insert an
espresso capsule and close the brew head.
2. With a cappuccino or latte mug on the cup
tray, push once for cappuccino or push
twice for latte. The LCD will say
CAPPUCCINO BREWING or LATTE
BREWING, respectively.
NOTE: If you adjust your espresso to a higher
volume for your cappuccino or latte, we
recommend using a lungo or more bold
espresso capsule. Adjusting your espresso to a
higher volume while using a lighter or less bold
capsule will alter the taste.
CAUTION: Scalding may occur if the brewing
head is opened during brewing cycle.
3. Once brewing is complete, the LCD will say
BEVERAGE READY, ENJOY.
PROGRAMMING YOUR
ESPRESSO DEFINED
ESPRESSO/CAPPUCCINO/
LATTE MACHINE
1. Select MENU button to program your
preferred settings:
A. STEAM MILK: Select to manually
steam milk.
NOTE: Max time to steam is 45 seconds.
B. ESPRESSO VOLUME: Select to adjust your
espresso volume from 18–45ml.
Default: 40ml
NOTE: Larger coffee volume may alter your
espresso's taste. We recommend using a
bolder capsule to compensate for the
additional water.
C. DOUBLE ESPRESSO VOLUME: Select to
adjust your espresso volume from
70–100ml. Default: 90ml
NOTE: Larger coffee volume may alter your
espresso's taste. We recommend using a
lungo or bolder capsule to compensate for
the additional water.
D. CAPPUCCINO COFFEE VOLUME: Select
to adjust your cappuccino volume from
18–45ml. Default: 40ml
E. CAPPUCCINO MILK VOLUME: Select to
adjust your cappuccino milk volume from
16–25 seconds. Default brew time:
22 seconds
NOTE: Milk volume is determined in
seconds. Less seconds = less milk. More
seconds = more milk.
F. LATTE COFFEE VOLUME: Select to adjust
your latte volume from 18–45ml.
Default: 40ml
G. LATTE MILK VOLUME: Select to adjust
your cappuccino milk volume from 28–40
seconds. Default brew time: 32 seconds
NOTE: Milk volume is determined in
seconds. Less seconds = less milk. More
seconds = more milk.
H. BREW TEMPERATURE: Raise or lower the
brew temperature from 195˚F – 205˚F in
1-degree increments. Default: 200˚F
I. STANDBY TIME: Select the amount of time
your unit will remain on before going into
standby mode, from 15 minutes to 4 hours.
™
Standby options: 15 min., 30 min., 1 hr., 1.5 hr.,
2 hr., 2.5 hr., 3 hr., 4 hr., 5 hr., Default: 30 min.
J. EMPTY BIN ALERT: Choose ON to be
alerted by a beep when the capsule bin is
full. Choose OFF to turn this beep off.
Default: ON
NOTE: Screen will continue to alert you
when the bin is full, whether the alert tone is
ON or OFF.
K. FACTORY SETTINGS: Select OK to restore
unit to default settings.
Default Settings:
Espresso: 40ml
Double Espresso: 90ml
Cappuccino: 40ml espresso,
22 seconds milk
Latte: 40ml espresso,
32 seconds milk
Brew Temperature: 200˚F
Standby Time: 30 minutes
Empty Bin Alert: ON
L. SERIAL NUMBER: Displays serial number
of your machine.
7