KTM Power Parts 60012027200 Guia De Instalacion página 6

4
Then fit the cover [8] by bending it slightly to insert the tongues
(Fig. 2).
8
2
ASSEMBLY INSTRUCCIONS
Once the adaptor has been assembled you are then ready to fit the TOP
CASE.
1- To open the TOP CASE, insert the key in the vertical position.
Operate the locking mechanism as shown in Fig. 3. Turning the key in a
clockwise direction will lock the TOP CASE so that it can neither be
opened nor detached from the adaptor. The key can be removed in
either the locked or unlocked position.
3
2- To remove the TOP CASE, insert the key in the vertical position, hold
the case by the handle, operate the lower part of the opening
mechanism and lift up gently until the anchorage comes out of the
case. Then pull to remove the upper tongue from the adaptor groove
(Fig.4).
4