Before You Begin - Kohler K-2314 Guia De Instalacion

Recommended Tools and Materials
Pencil
Socket Wrench W/
10 mm Metric Socket

Before You Begin

- Model K-3081 wall-mount vanity is designed for placement under the lavatory.
- Remove the lavatory from its carton and inspect for damage.
- If a brace is installed for the lavastone countertop, no additional brace is required for this installation.
- This lavatory is available with no faucet drilling, single-hole drilling, drilled with 4" (10.2cm) centers or drilled
with 8" (20.3cm) centers. Lavatory with no drilling is designed for use with Purist mirrored cabinets with Laminar
Flow faucet. A wall-mount faucet (minimum spout length 9" (22.9cm)) can also be used with this model.
- Before installing the finished wall make sure the proper brackets are installed for each of your furniture choices in
the Purist Suite. Plumbing and electrical (if applicable) rough-ins should also be complete.
- If installing multiple Purist components (cabinet, countertop, lavatory, etc.) read all product installation
instructions before beginning. Some components should be installed before others. Refer to Homeowners Guide
for sample configurations.
- Observe all local plumbing and building codes.
B
1012580-2-
Measuring Tape
Adjustable
or an
Wrench
Phillips
Drill
Screwdriver
Safety Glasses
2
Screws
Washers
Level
Kohler Co.