Kohler K-7514 Guia De Instalacion página 6

Hybrid Models
Hybrid
Energy
Cell
3. Install the Power Supply
NOTE: Avoid the area in front of the sensor for 2 minutes after
connections are complete. The sensor will not function correctly if it
is triggered in the first 2 minutes. Disconnect and reconnect the
power to reset the sensor.
Mount the Hybrid Energy Cell (HEC) under the counter using
two screws (not supplied).
Connect the HEC to the faucet wire.
Avoid the area in front of the sensor for 2 minutes.
1124217-2-E
Faucet Wire
Deck
6 Kohler Co.